Amp 4x250W/8ohm EU
- General
- Number of amplifier channels 4
- Total output all channels driven 1000 W
- Peak output voltage per channel 100 V / 70 Vrms
- Max. output current 14 Arms
- Max output power (all channels driven)
- 2 ohms N.R.
- 4 ohms 250 W
- 8 ohms 250 W
- 16 ohms 250 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 125 W)
- 70 V 250 W
- 100 V Can deliver 250 W to a 100 V load tapped at 500 W
- Performance
- THD 20 Hz - 20 kHz at 1 W <0.1%
- THD at 1 kHz and 1 dB below clipping <0.05%
- Signal to Noise Ratio >112 dBA
- Channel separation (Crosstalk) at 1 kHz > 70 dB
- Frequency Response 2 Hz - 40 kHz
- Input impedance 20 kOhm
- Common Mode Rejection (CMR) 50 dB
- Output impedance 25 mOhm
- Gain, Sensitivity and Limiters
- Limit and gain switch defining limit and gain (per channel) 2 pos: Lo-Z and 70 V
- VPL for 70 V mode 100 V
- VPL for Lo-Z mode 63.2 V
- Sensitivity for stated power into 8 Ohm in Lo-Z mode 4 dBu
- Sensitivity for 70.7 V out in 70 V mode 4 dBu
- Sensitivity for stated power into 4 Ohm in Lo-Z mode 1 dBu
- Sensitivity for stated power into 16 Ohm in 70 V mode 3 dBu
- Gain in 70 V mode 35.2 dB
- Gain in Lo-Z mode 31.2 dB
- Level adjustment (per channel) Rear panel potentiometer, from -inf to 0 dB
- Connectors and Switches
- Input connectors (per ch.) 3 - pin detachable screw terminals, electronically balanced
- Output connectors (per ch.) 2 - pin detachable screw terminals
- High pass filter Fixed at 50 Hz, switchable per channel
- Power control Can be used to go between standby and ON
- GPI (power control input) Contact closure type, 2-pin detachable screw terminal, controls the power state
- GPO (power state output) Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state
- Cooling Two fans, front-rear airflow, temperature controlled speed
- Power
- Nominal voltage 100 - 240 VAC
- Operating voltage 85 – 265 VAC
- Standby consumption <1 W
- Mains connector IEC inlet
- Dimensions
- Dimensions W: 483 mm (19”), H: 44 mm (1 U), D: 381 mm (15”)
- Weight
- Weight 6.2 kg (13.7 lbs)
Amp 4x250W/8ohm EU
- General
- Number of amplifier channels 4
- Total output all channels driven 1000 W
- Peak output voltage per channel 100 V / 70 Vrms
- Max. output current 14 Arms
- Max output power (all channels driven)
- 2 ohms N.R.
- 4 ohms 250 W
- 8 ohms 250 W
- 16 ohms 250 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 125 W)
- 70 V 250 W
- 100 V Can deliver 250 W to a 100 V load tapped at 500 W
- Performance
- THD 20 Hz - 20 kHz at 1 W <0.1%
- THD at 1 kHz and 1 dB below clipping <0.05%
- Signal to Noise Ratio >112 dBA
- Channel separation (Crosstalk) at 1 kHz > 70 dB
- Frequency Response 2 Hz - 40 kHz
- Input impedance 20 kOhm
- Common Mode Rejection (CMR) 50 dB
- Output impedance 25 mOhm
- Gain, Sensitivity and Limiters
- Limit and gain switch defining limit and gain (per channel) 2 pos: Lo-Z and 70 V
- VPL for 70 V mode 100 V
- VPL for Lo-Z mode 63.2 V
- Sensitivity for stated power into 8 Ohm in Lo-Z mode 4 dBu
- Sensitivity for 70.7 V out in 70 V mode 4 dBu
- Sensitivity for stated power into 4 Ohm in Lo-Z mode 1 dBu
- Sensitivity for stated power into 16 Ohm in 70 V mode 3 dBu
- Gain in 70 V mode 35.2 dB
- Gain in Lo-Z mode 31.2 dB
- Level adjustment (per channel) Rear panel potentiometer, from -inf to 0 dB
- Connectors and Switches
- Input connectors (per ch.) 3 - pin detachable screw terminals, electronically balanced
- Output connectors (per ch.) 2 - pin detachable screw terminals
- High pass filter Fixed at 50 Hz, switchable per channel
- Power control Can be used to go between standby and ON
- GPI (power control input) Contact closure type, 2-pin detachable screw terminal, controls the power state
- GPO (power state output) Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state
- Cooling Two fans, front-rear airflow, temperature controlled speed
- Power
- Nominal voltage 100 - 240 VAC
- Operating voltage 85 – 265 VAC
- Standby consumption <1 W
- Mains connector IEC inlet
- Dimensions
- Dimensions W: 483 mm (19”), H: 44 mm (1 U), D: 381 mm (15”)
- Weight
- Weight 6.2 kg (13.7 lbs)