General
Recording media SD card / SDHC card
CompactFlash (CF) card
File system FAT32 (4 GB or more)
FAT16 (2 GB or less)
File format BWF (Broadcast Wave Format)
WAV (Waveform Audio Format)
Number of channels 2 channels
Quantization bit rate 16-bit, 24-bit
Sampling frequency 44.1/48/88.2/96/176.4/192 kHz
Clock reference INTERNAL, WORD IN, VIDEO IN, DIGITAL IN
Time code frame rates 23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF
Analog audio inputs and outputs
The error for nominal and maximum levels is ±1 dB for all input and output jacks except the PHONES jack.
ANALOG INPUTS L / R (BALANCED XLR–3–31 (1: GND, 2: HOT, 3: COLD)
Input impedance 4.3 kΩ
Nominal input level +4 dBu (1.23 Vrms) ±1 dB
(+6 dBu when maximum input level is set to +15 dBu an Digital Ref. Level is set to –9 dB)
Maximum input level (selectable) +15 dBu (4.36 Vrms)
+18 dBu (6.16 Vrms)
+20 dBu (7.75 Vrms)
+22 dBu (9.76 Vrms)
+24 dBu (12.3 Vrms)
ANALOG INPUTS L / R (UNBALANCED) RCA pin jack
Input impedance 3.9 kΩ
Nominal input level –10 dBV (0.316 Vrms) ±1 dB
Maximum input level +6 dBV (2.0 Vrms) ±1 dB
ANALOG OUTPUTS L / R (BALANCED) XLR–3–32 (1: GND, 2: HOT, 3: COLD)
Output impedance 100 Ω or less
Nominal output level +4 dBu (1.23 Vrms) ±1 dB
(+6 dBu when Digital Ref. Level is set to –9 dB)
Maximum output level (selectable) +15 dBu (4.36 Vrms)
+18 dBu (6.16 Vrms)
+20 dBu (7.75 Vrms)
+22 dBu (9.76 Vrms)
+24 dBu (12.3 Vrms)
ANALOG OUTPUTS L / R (UNBALANCED) RCA pin jack
Output impedance 100 Ω or less
Nominal input level –10 dBV (0.32 Vrms) ±1dB
Maximum input level +6 dBV (2.0 Vrms) ±1dB
PHONES jack 6.3-mm stereo jack
Maximum output power 45 mW + 45 mW or more (THD+N 0.1% or less, into 32 Ω)
Digital audio inputs and outputs
DIGITAL IN (S/PDIF) RCA pin jack
Input signal voltage amplitude 200 mVpp to 600 mVpp
Input impedance 75 Ω
Format AES3-2003 / IEC60958-4 (AES/EBU)
IEC60958-3 (SPDIF)
Supported sampling frequencies 44.1/48/88.2/96/176.4/192 kHz (Single / Double / Quad)
When SRC is ON, the receivable range is 32–192 kHz.
DIGITAL IN (AES/EBU) XLR–3–31
Input signal voltage range 200 mVpp to 10 Vpp
Input impedance 110 Ω ±20%
Format AES3-2003/IEC60958-4(AES/EBU)
IEC60958-3(SPDIF)
Supported sampling frequencies 44.1/48/88.2/96/176.4/192 kHz (Single/ Double/ Quad)
When SRC is ON, the receivable range is 32–192 kHz.
DIGITAL OUT (S/PDIF) RCA pin jack
Output voltage 0.5 Vpp ±20%
Input impedance 75 Ω
Format IEC60958-3 (SPDIF)
Supported sampling frequencies 44.1/48/88.2/96/176.4/192 kHz (Single/ Double/ Quad)
DIGITAL OUT (AES/EBU) XLR–3–32
Output voltage 2–5 Vp–p/110 Ω
Output impedance 110 Ω ±20%
Format IEC60958–4 (AES3–2003, AES/EBU)
Supported sampling frequencies 44.1/48/88.2/96/176.4/192 kHz (Single/ Double/ Quad)
Control inputs and outputs
RS–422 (attached with Option SY-2 board) D–sub 9-pin
RS–232C D–sub 9-pin
PARALLEL D–sub 25-pin
TIME CODE IN (attached with Option SY-2 board) BNC connector
Signal voltage amplitude 0.5–5 Vpp
Input impedance 10 kΩ
Format SMPTE 12M–1999 compliant
TIME CODE OUT (attached with Option SY-2 board) BNC connector
Signal voltage amplitude 2 Vpp
Output impedance 600 Ω
Format SMPTE 12M–1999 compliant
WORD/VIDEO IN BNC
Input voltage 5 V TTL equivalent (WORD IN)
Signal voltage amplitude 1 Vpp (VIDEO IN)
Input impedance 75 Ω ±10%
Allowable frequency deviation of external synchronization ±100 ppm
Input frequencies (WORD) 44.1/48/88.2/96/176.4/192 kHz
Input signal (VIDEO) 24/25/29.97/30 Frame (NTSC/PAL Black burst, HDTV Tri–Level)
WORD/VIDEO THRU/OUT BNC (OUT/THRU switch included (OUT is only for WORD OUT)
Signal voltage amplitude 5 V TTL equivalent
Output impedance 75 Ω ±10%
Output frequency (WORD) 44.1/48/88.2/96/176.4/192 kHz
Frequency stability ±10 ppm or less (Ta = 20º C)
ETHERNET RJ45
Compatibility 100BASE-TX, 1000BASE-T
KEYBOARD Mini-DIN (PS/2)
USB USB A-type 4-pin
Protocol USB2.0 HIGH SPEED (480 Mbps) compliant
REMOTE RJ45
Supply voltage 13 V
Signal LVDS serial
Transmission contents LCD display DATA, asynchronous serial transmission control signals, port control signals
Audio performance
Frequency response, ANALOG IN to ANALOG OUT 20 Hz – 20 kHz ±0.5 dB (Fs = 44.1/48 kHz, JEITA, recording and playback)
20 Hz – 40 kHz +0.5 dB/−2 dB (Fs = 88.2/96 kHz, JEITA, recording and playback)
20 Hz – 80 kHz +0.5 dB/−5 dB (Fs = 176.4/192 kHz, JEITA, recording and playback)
Distortion, ANALOG IN to ANALOG OUT 0.005% or less (JEITA, recording and playback)
S/N ratio, ANALOG IN to ANALOG OUT 100 dB or more (JEITA, recording and playback)
Power supply and other specifications
Power AC 100-240 V, 50–60 Hz
Power consumption 22 W
External dimensions (W x H x D) 483 mm x 94 mm x 314 mm
Weight 4.7 kg
Operating temperature range 5–35 °C