The SC28 is a 2 input, 8 output digital system controller containing pre-programmed tunings for QSC loudspeaker systems (see list of supported loudspeakers at right). In addition to the preset tunings, the SC28 also offers user-adjustable equalization and delay.
Audio inputs and outputs are via balanced, line-level, analog XLR connectors. Four outputs for each of the two inputs are provided for use with 2 or 3-way systems plus subwoofers. Simple to operate yet uncompromised in audio quality, the SC28 uses 48 kHz, 24-bit A/D and D/A conversion with 32-bit, floating point DSP for wide dynamic range and low distortion. Advanced DSP is capable of implementing tunings that incorporate IIR (Infinite Impulse Response) as well as FIR (Finite Impulse Response) filters.
QSC system engineers have employed the power of the SC28s FIR (finite impulse response) filters to implement "Intrinsic Correction™" of the loudspeaker. The goal of Intrinsic Correction™ is to provide a drive signal to the amplifiers and loudspeakers that will result in the most accurate acoustical magnitude, frequency and phase domain performance possible. When properly implemented, Intrinsic Correction™can compensate for many causal phenomena such as the effects of waveguide acoustical impedance and loudspeaker cone resonance. The result is a loudspeaker system with excellent power response and extremely natural, uncolored sound across its frequency band and coverage area. An array of loudspeakers with Intrinsic Correction™ tunings will also be very responsive to the use of equalization to compensate for array configuration, acoustical conditions or user preferences.
Selection of tunings is accomplished by simply scrolling through a list of QSC loudspeakers and selecting the configuration on the LCD panel. A similar process is used to sel ect the QSC amplifiers being used and to configure amplifier input sensitivity for proper dynamic protection gain structure. Settings for new QSC products may be loaded into the SC28 via a rear-mounted USB port.
Once the processor settings have been matched to the system, the user or installer can take advantage of an integral, 6 band parametric equalizer, high and low shelving filters and signal delay to optimize for acoustic, environmental or aesthetic considerations. Password protection is included to prevent unauthorized tampering. The SC28 is easy to use and delivers superb audio performance at a very affordable price.
SPECIFICATIONS | |
Dynamic Range
Unweighted: A weighted: (AES-17, -60 dB Method, all sensitivities) | > 104dB
> 107dB |
Input Impedance
Unbalanced (nominal): Balanced (nominal): | 69k ohms
11k ohms |
Common Mode Rejection
20 Hz - 20 kHz (min): 20 Hz - 20 kHz (typ): | > 75 dB
> 80 dB |
Input Sensitivities:
| Vrms: 1.5V, 3V, 9V, 18V
dBU: 5.7, 11.8, 21.3, 27.3 dBV: 3.5, 9.5, 19.1, 25.1 |
Distortion
+4 dBu: 2 dB below clip (max): (AES-17, 20 Hz - 20 kHz, all sensitivities) | < 0.006 THD+N
< 0.006 THD+N |
Crosstalk (20 Hz – 20 kHz)
Inter-channel (max): |
> 75 dB |
Frequency Response: | +/- 0.1dB fr om target response |
Audio Converters: | 24 bit, 48k Hz |
Mute: | Infinite Attenuation |
Throughput Delay: | 1.4125 milliseconds (A/D – DSP - D/A) |
Program Inputs:
Connector Type: Type: Grounding: Pinout: | 2
XLR female, locking Electronically balanced All shield terminals connected to chassis 1: (GND) 2: (+), 3: (-) |
Program Outputs:
Connector Type: Type: Grounding: Pinout: | 8
XLR male Electronically balanced All shield terminals connected to chassis 1: (GND) 2: (+), 3: (-) |
Controls: | Rotary encoder knob with push-to-select function |
Indicators
Power: LCD Data Display: Input/Output Meters: | Blue, front panel
2 lines 16 character, backlit, front panel Green, Yellow, Red, front panel |
USB Port: | USB type “B” |
AC Power Requirements: | 100-240 VAC, 50-60 Hz, no user adjustment required |
AC Power Connection: | IEC-type inlet |
AC Power Cord: | 2 meters long, #18AWG |
Dimensions:
| 1.73"H x 18.94"W x 6.67"D
(44 mm x 481 mm x 169 mm) 1 Rack Unit |
Weight: | 4.5 lbs / 2 kg |