Одноканальный активный DiBox, вход jack, выход XLR
- Max Input Level +12 dB Phantom powered, +8 dB using 12 VDC Power Supply.
- Input Impedance 1 Meg Ohm
- Max Output Level (nominal)
- +12 dB 10K Ohm load using Phantom power
- +11 dB 600 Ohm load using 12 VDC Power Supply
- Output Impedance 680 Ohms Balanced
- Output Signal to Noise -100 dB unweighted, -104 dB A weighted
- Dynamic Range 112 dB 10K Ohm load using 12 VDC Power Supply
- Distortion @100 Hz 0.0025%, @1KHz 0.0026%, @10KHz 0.0033%
- Frequency Response 20Hz to 20KHz, ± 0.2 dB
- Gain through Unit 6dB (Normal input, Pad switch out)
- Power Requirements 48V Phantom power on XLR pins 2 and 3; 12-15V DC from external supply
- Pad Switch -20 dB attenuation
- Speaker Input
- -40 dB attenuation, equivalent to 100:1 decrease in input level.
- -60 dB attenuation available when Pad switch also enabled
- Input Connectors Insulated jacks
- Output Connector
- 3 pin XLR. Wired Pin 1 Ground, Pin 2 + Hot, Pin 3 - Cold. Audio Ground (Pin 1) lift switch fitted
- Construction
- All-steel powdercoated chassis, fibreglass PCB