Активный двухканальный Di box с регулировкой чувствительности. Питание фантомное или от аккумулятора.
- Max Input Level
- +13 dB Phantom powered
- +6 dB Battery powered
- Input Impedance 1 Meg Ohm
- Max Output Level
- +17 dB 10K Ohm load Phantom powered
- +12 dB 10K Ohm load Battery powered
- +11 dB 600 Ohm load Phantom powered
- +12 dB 600 Ohm load Battery powered
- Output Impedance 680 Ohms Balanced
- Output Signal to Noise
- -100 dB unweighted
- -104 dB A weighted
- Dynamic Range
- 117 dB 10K Ohm load Phantom powered
- 112 dB 10K Ohm load Battery powered
- 111 dB 600 Ohm load Phantom powered
- 107.5 dB 600 Ohm load Battery powered
- Distortion
- 100 Hz .0027%, 1KHz .0028%, 10KHz .0037%
- Frequency Response 20Hz to 20KHz, ± 0.2 dB
- Gain through Unit: 6dB (Normal input, Pad switch out)
- Pad Switch: -20 dB attenuation
- Speaker Input
- -40 dB attenuation, equivalent to 100:1 decrease in input level
- -60 dB attenuation available with Pad switch
- Input Connectors
- Insulated jacks (!!!Note that the Input connectors switch the unit on when a plug is inserted. Remove plug when storing to avoid battery drain!!!)
- Output Connector
- 3 pin XLR. Wired Pin 1 Ground, Pin 2 + Hot, Pin 3 - Cold.
- With Audio Ground (Pin 1) lift switch
- Construction
- All-steel chassis, fibreglass PCB, NiMH battery